LiteTile+ Plus 8 is the first foldable LED lighting fixture made completely with engineered textiles. LiteTile+ Plus 8 allows the user to install thin, soft, and adjustable Kelvin light into areas previously inaccessible. Because LiteTile+ Plus folds up to 180º between each light engine, the luminaire can be shaped into numerous configurations allowing for 360º, two-sided, or irregularly shaped setups. LiteTile+ Plus 8 can be directly attached to walls or ceiling surfaces such as office drop-ceilings with just spring-clips or tape. The LiteTile+ Plus 8 really shows its versatility when four units are coupled together and attached to a overhead/buttery 8’ x 8’ frame. That is 1600 watts and more than 18400 cinema quality emitters creating ultra-soft Hybrid light output without the need for additional diffusion.


The New CineMitters — Extending the Possibilities.

LiteGear officially unveils the new CineMitter series of applied-phosphor LEDs. Exclusive to LiteGear, these new emitters set the standard for cinematic, color-correct LED lighting. Efficient and full-spectrum, these LED chips offer state-of-the-art output with a 40% increase in brightness over VHO Pro. Another distinct feature of the CineMitter is the extended Kelvin range. LiteGear pushed the lower CCT to 2600 degrees Kelvin (K) allowing for candlelight or deep-tungsten output while increasing the CRI to a staggering 95+ — that’s nearly indistinguishable from traditional incandescent sources! On the cool side, the CCT was pushed up to 6200K to better balance for overcast sky or cool white fluorescents. This increase in CCT still achieves a CRI of 95+ and provides beautiful, full-spectrum daylight.

LiteMat+ Plus Tungsten Color Rendering Index and Spectral Graph

LiteMat+ Plus Daylite Color Rendering Index and Spectral Graph


LiteDimmmer+ Plus —
Designed for +Plus Series Luminaires.

LiteDimmer+ Plus incorporates legendary LiteDimmer cinema-grade electronics into a singular housing combined with the AC or DC power supply. These Hybrid dimmers are available in manual and DMX versions, with wattages starting at 100W through 400W, and feature the new locking PL7 connector. Some of the LiteDimmer+ Plus units feature CurrentSense technology which regulates the output current regardless of how many LiteMats or LiteTiles are plugged in.

LiteTile+ Plus 4 Optional Accessories


LiteBox — A Modular, Turnkey SoftBox Solution

LiteBox is the perfect accessory for your new LiteTile+ Plus.  This modular system is designed so that you can mount your LiteTile to a lightweight rigid frame and then have the option of diffusing the LEDs at 1 inch (2.5 cm) or 6 inches (15 cm) away. LiteBox comes with the same three, familiar diffusers as LiteMat — so you can always integrate them together — and opaque fabric sides to eliminate spill light when used in the 6-inch deep version.  For rigging, LiteBox is surrounded by 1/4”-20 PEM® nuts and comes with an optional 5/8” baby pin adapter or grip head mounts.


LiteTile+ Plus 8 Mechanical and Electrical Specifications

LiteTile+ Plus 8 Photometric Specifications

LiteTile+ Plus 8 Beam Spread