Building on the success of the original LiteMat, with its thin and ultra lightweight housing, soft color-correct Hybrid (bi-color) output, and convenient mounting options, the S2 LiteMat takes lighting to the next level. The new S2 LiteMat is nearly 40% brighter than the original LiteMat, has better color quality, and a widely extended Kelvin range all without an increase in power draw. In addition, overall CRI increased to 95+ with a matching TLCI of more than 95 as well. With all of these tremendous advancements, S2 LiteMat remains compatible with all existing LiteDimmers, LitePower supplies, and cables.

The S2 LiteMat 3 is based on three “tiled” light engine measuring 9.5 in. x 19 in. (240 mm x 480 mm). The head unit features 864 genuine CineMitter LEDs and is covered by a thin, clear polycarbonate layer and bordered entirely with Velcro® “loop” fastener. Mounting is provided with a Kino Flo® compatible, removable gimbal mount. The “soft-through-pixelization” method allows the LiteMat 2 to achieve surprisingly bright light levels while remaining under 1 in. (25 mm) thick and weighing just 4.7 lb (2.1 kg).

 


 Color-Correct LED Panels Featuring CineMitters.

The number one request from existing LiteMat users was a widened Kelvin temperature range. After years of working on the new Cinema emitters (CineMittersTM) we were able to push the lower CCT to 2600 degrees allowing for candle-light or deep-tungsten output while increasing the CRI to a staggering 95+ average. That’s nearly indistinguishable from incandescent sources! On the cool side, the CCT was pushed up to 6000 degress to better balance for overcast sky or cool white fluorescents. This Kelvin extension still achieved a CRI increase to 95+ and provides beautiful, full-spectrum daylight.


 Simple, Lightweight, and Versatile.

The S2 LiteMat 3 can be used anytime that soft and controllable light is required. As a key light, you can easily mount the unit on a “Baby” stand or attach it to an elevator wall with adhesive Velcro®. Because it’s lightweight, LiteMat makes a great handheld fill light or can easily be mounted overhead.

 

 

Specifications »

S2 LiteMat 3 Photometric Specifications

Kelvin
CCT (K)
CRI
TLCI
(2012)
Lumens
@ 12”
F.C. / Lux
(Beam Spread)
@ 24”
F.C. / Lux
(Beam Spread)
@ 36”
F.C. / Lux
(Beam Spread)
@ 48”
F.C. / Lux
(Beam Spread)
@ 60”
F.C. / Lux
(Beam Spread)
@ 72”
F.C. / Lux
(Beam Spread)
@ 84”
F.C. / Lux
(Beam Spread)
@ 96”
F.C. / Lux
(Beam Spread)

Tungsten

2600

97+

96+

7086

1995 / 21464

(31” x 34”)

499 / 5366

(61” x 68”)

222 / 2385

(92” x 102”)

125 / 1342

(123” x 136”)

80 / 859

(154” x 170”)

55 / 596

(184” x 204”)

41 / 438

(215” x 238”)

31 / 335

(246” x 272”)

Mid

4300

95+

95+

7644

4269 / 45935

(31” x 34”)

1067 / 11484

(61” x 68”)

474 / 5104

(92” x 102”)

267 / 2871

(123” x 136”)

171 / 1837

(154” x 170”)

119 / 1276

(184” x 204”)

87 / 938

(215” x 238”)

67 / 718

(246” x 272”)

Daylite

6000

95+

95+

8205

2481 / 26694

(31” x 34”)

620 / 6674

(61” x 68”)

276 / 2966

(92” x 102”)

155 / 1668

(123” x 136”)

99 / 1068

(154” x 170”)

69 / 742

(184” x 204”)

51 / 545

(215” x 238”)

39 / 417

(246” x 272”)

S2 LiteMat 3 Mechanical and Electrical Specifications

Series
Kelvin
Height
(inch)
Height
(mm)
Width
(inch)
Width
(mm)
Depth
(inch)
Depth
(mm)
Weight
(lbs)
Voltage
(VDC)
Current
(Amps)
Watts
LED Qty

LiteMat 3

Hybrid

30.5

775

21

533

0.9

23

4.7

12

12

150

864

S2 LiteMat Optional Accessories

Accessories include a 3-inch PolySkirt that helps control the light output by limiting the amount of light exiting the fixture beyond the 120-degree primary field. There are 3 densities of Velcro®-attached diffusers that mount to the PolySkirt along with a light-control louver. The ParaSquare Louver is an aluminized sheet with parabolic elements within each hexagonal cell. It works well to provide desirable light output with refined edges and an even field. Its unique properties allow for lossless light output while providing outstanding peripheral light reduction. 



LiteMount

The LITEMOUNT is based on the RAM­­® ball-and-socket mounting system, a trusted, durable, and reliable mounting system with many
ancillary accessories. (Available Late 2016)


 Center Mount

The CENTER MOUNT is based on the Kino Flo® “K-Mount” system, a well established, reliable, and functional mounting system.


PolySkirt

The POLYSKIRT is a multi-wall polypropylene (coroplast) skirt that helps control the light output by limiting the amount of light exiting the fixture beyond the 120 degree primary field. It mounts to the LiteMat head with Velcro®and serves as an accessory holder as most require its use.


PolySnoot

The POLYSNOOT is a multi-wall polypropylene (coroplast) snoot that helps to further control light output by not only limiting the amount of light exiting the fixture beyond the 120-degree primary field but also allowing for the use of a second layer of diffusion or the SoftGrid. It mounts to the PolySkirt with Velcro® and is required when the SoftGrid is being used. (Available March 2017)


Parasquare Louver

The Parasquare louver is an aluminized plastic molded sheet with parabolic elements within each square cell that provides desirable and loss-less light output with refined edges and an even field. Velcro® strips are attached to the edges to serve as a mounting mechanism to the PolySkirt.


PolyGrid

The POLYGRID is a polycarbonate grid available in four different angles with circular cells that eliminate peripheral light and is incredibly lightweight. Velcro® strips are attached to the edges to serve as a mounting mechanism to the PolySkirt. (Available March 2017)


SoftGrid

The SOFTGRID is a collapsible fabric grid and available in a 30-degree angle. It can be easily stowed away when not in use, is durable, and helps to cut and shape light beautifully. The SoftGrid must be used in conjunction with the PolySnoot and is bordered entirely with Velcro® to serve as a mounting mechanism to the PolySnoot. (Available March 2017)


Diffusers

Woven fabric diffusers are made in industry-standard varieties and are assembled by stitching “hook” Velcro® around their borders to mate with the “loop” on the PolySkirt. Three densities of grid-cloth (quarter, half, and full) are available.


KitBag

The KITBAG holds the LiteMat fixture as well as the accessories, power supply, and cables. The bag is specifically designed to protect your gear from “everyday” damage due to environmental conditions.


See Specifications »